DOWNLOAD LEAGOO ALFA 2 STOCK ROM/FIRMWARE

Leagoo Alfa 2 Quick Review

Leagoo Alfa 2 runs on Android 5.1 Lollipop themed with Leagoo OS 1.1.

This tab is a 5-inch ips touchscreen display with a resolution of 720 X 1280 pixels with ~294ppi. A size of 143.6 x 72.6 x 7.5 mm and weighs about 140g.

Powered by 1.3GHz quad-core processor MediaTek MT6580 and 1GB of RAM there’s also 8GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 13-megapixel primary camera with LED Flash and a 5-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports 2G and 3G networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 2600Mah non-removable battery

DOWNLOAD LEAGOO ALFA 6 STOCK ROM/FIRMWARE

Leagoo Alfa 6 Quick Review
Leagoo Alfa 6 runs on Android 4.4 KitKat.

This tab is a 4.5-inch ips touchscreen display with a resolution of 480 X 854 pixels with ~218ppi. A size of 133.1 x 65.6 x 8.2 mm and weighs about 136g.

Powered by 1.3GHz quad-core processor MediaTek MT6582 and 1GB of RAM there’s also 8GB of internal storage which can be expanded up to 32GB with microSD. 

There is a 5-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports 2G and 3G networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 1600Mah non-removable battery

DOWNLOAD LEAGOO ALFA 6 STOCK ROM

LEAGOO_ALFA6_RJK301_OTD_K451_ALFA_82_KK_V0.5.2_S160426

DOWNLOAD ROM

How to flash leagoo Alfa 6 using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site

DOWNLOAD QMX/CMX S7 PRO STOCK ROM/FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

How to flash Sony Xperia Clone using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Note that this is a clone device with different funny names like CMX, QMX, XBN etc. Normally a good way to know which file to use is by reading the build id but sometimes the build id shows android generic stuffs thus the best way to identify it is by checking what's on the board id.
Also if you are not sure of the file you want to flash, make a stock backup with Miracle box, CM2, GSM Alladin etc so that if something goes wrong you can put the phone back at it original state.

Tip
Most times, the problem we have with Clone devices is hang on logo. 
The easiest solution to fix this problem is flashing just boot.img. If you are faced with this hang on logo problem, simply backup(Read) boot.img and lk.bin file using miracle box, gsm aladin, infinity cm2 etc
Then Flash back the two images backed up and the phone will be ok with no data loss.

DOWNLOAD QMX or CMX S7 PRO STOCK ROM BELOW

V109_QHD_V1.2_84_20161104_1939_V1.1.7_AI_S7_ORRO

DOWNLOAD ROM

V109_QHD_V1.2_84_20161219_2226_V1.1.9_AI_S7_ORRO

DOWNLOAD ROM

********************************************************************************

V109_QHD_V1.2_88_20160627_1551_V1.0.6_AI_S7_ORRO

DOWNLOAD ROM

V109_QHD_V1.2_88_20160720_1802_V1.0.8_AI_S7_ORRO

DOWNLOAD ROM

 Learn how to easily download files from Mega

PC or Mobile

Report if you cannot download any of these files.

Like and share
facebook.com/romkingz

Donate to support this site

DOWNLOAD CMX NOTE 5 STOCK ROM/FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

How to flash Sony Xperia Clone using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem
Note that this is a clone device with different funny names like CMX, QMX, XBN etc. Normally a good way to know which file to use is by reading the build id but sometimes the build id shows android generic stuffs thus the best way to identify is by checking what's on the board id.
Also if you are not sure of the file you want to flash, make a stock backup with Miracle box, CM2, GSM Alladin etc so that if something goes wrong you can put the phone back at it original state.

Tip
Most times, the problem we have with Sony Xperia Clone devices is hang on logo. 
The easiest solution to fix this problem is flashing just boot.img. If you are faced with this hang on logo problem, simply backup(Read) boot.img and lk.bin file using miracle box, gsm aladin, infinity cm2 etc
Then Flash back the two images backed up and the phone will be ok with no data loss.

DOWNLOAD CMX NOTE 5 STOCK ROM BELOW

P668QB_V101En20151230

DOWNLOAD ROM

P668QB_V101En20151105

DOWNLOAD ROM

 Learn how to easily download files from Mega

PC or Mobile

Report if you cannot download any of these files.

Like and share
facebook.com/romkingz

Donate to support this site

DOWNLOAD LEAGOO ELITE 6 STOCK ROM/FIRMWARE

Leagoo Elite 6 Quick Review
Leagoo Elite 6 runs on Android 5.1 Lollipop
This tab is a 4.5-inch ips touchscreen display with a resolution of 480 X 854 pixels with ~218ppi. A size of 131.1 x 65.8 x 8.9 mm and weighs about 112g.

Powered by 1.0GHz quad-core processor MediaTek MT6735P and 1GB of RAM there’s also 8GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 5-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports 2G, 3G and 4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 2200Mah non-removable battery

DOWNLOAD LEAGOO ELITE 6 STOCK ROM

LEAGOO_ELITE6_X5602_OTD_MYLEAGOO_E4_V0.3.9_S160407

DOWNLOAD ROM

How to flash leagoo e4 using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site

DOWNLOAD LEAGOO ELITE 5 STOCK ROM/FIRMWARE

Leagoo Elite 5 Quick Review
Leagoo Elite 5 runs on Android 4.4 Kitkat upgradeable to Android 5.1 lollipop.
This tab is a 5.5-inch ips touchscreen display with a resolution of 720 X 1280 pixels with ~267ppi. A size of 154.6 x 77 x 8.9 mm and weighs about 176g.

Powered by 1.0GHz quad-core processor MediaTek MT6735P and 2GB of RAM there’s also 16GB of internal storage which can be expanded up to 64GB with microSD. 

There is a 13-megapixel primary camera with LED Flash and a 8-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.1. Supports 2G, 3G and 4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.

This device is powered by a 4000Mah non-removable battery

DOWNLOAD LEAGOO ELITE 5 STOCK ROM

MYLEAGOO_OS_5.1_Elite5_R24_0213

DOWNLOAD ROM

How to flash leagoo elite 5 using SP Flash Tool

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

Report if you cannot download any of these files.

Like and share

facebook.com/romkingz

Donate to support this site

DOWNLOAD KIMFLY M10 STOCK FIRMWARE

Kimfly M10 Quick Review

This phone comes with a 5-inch touchscreen display with a resolution of 480 X 800 pixels with ~196ppi. A size of 131 x 68.1 x 10.8 mm and weighs about 200g.

Powered by 1.0GHz -core Spreadtrum Processor and 512MB of RAM there’s also 4GB ROM which can be expanded up to 32GB with microSD. 

There is a 2-megapixel primary camera with LED Flash and a 0.3-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G & 3G network. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope. 

Powered by a 2800Mah removable battery

DOWNLOAD KIMFLY M10 STOCK ROM

S16_A_BP248_LX_V2.0_20170602
DOWNLOAD ROM

S16_A_BP251_LX_V1.3_20170414
DOWNLOAD ROM

Learn how to easily download files from Mega

PC or Mobile

How to flash/upgrade this device 

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because 

flashing a wrong firmware, can render the device useless

(can't power on, can't charge and will not be detected by a computer)

Download and install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the .pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices require holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial of this process with video and pictures click here

You can also use tools like MiracleBox, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

Like and Share

facebook.com/romkingz

Donate to support this site

Play this fun tennis game using another android phone as racket (Nintendo WII Style)

If you are a fan of the Nintendo WII Sports games and tennis to be precise you will just love this. This tennis game turns any second android phone or wear into a racket to play the game. It’s really easy to set up.

Head straight to Google Playstore and download Tennis Racketeering game by CoreApps with the device with large screen.

Then download and install Tennis Racketeering Racket app on the device (android phone or android gear) which you will use and racket for your gaming.

Once the game and racket app are installed on the devices, go to Bluetooth settings and pair them.

Now launch the game on the bigger device then go to options > rackets

You will see paired device on the list, select racket device and press OK.

On the device you want to use as racket, launch the racket app and set it up by pressing the calibrate button. When you see Connected! On screen, then you are done and good to go.

Select single player mode and choose your preferred hand (left or right handed) which you use for playing

Note that you will be waving your hand left and right so you will have to hold on to the device tight that’s why it’s preferable to use the android gear.

Again, it’s not a must to play the game with remote like racket you can still play it onscreen like any other android game. The racket stuff is just for additional fun.

Another game which is just like this but way more advance is Motion Tennis Cast. You will be able to play this tennis game with motion gestures on your HDTV, Smart TV or a web browser using screen cast software 'ike Chromecast, Miracast or AllShareCast, Wii-like gaming straight from on your Smartphone and also for free.

If you have any of the gadgets above then you can enjoy this game.

No matter which one you want to play just have fun this weekend..........

DOWNLOAD ITEL P11 STOCK ROM/FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk!

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong firmware, can render the device useless 

(can't power on, can't charge and will not be detected by a computer)

How to flash this device using Research Download or UpgradeDownload Tool

Download an install SPD drivers from here

Download the latest version of Research Download or UpgradeDownload from here

Extract and Launch Research Download/UpgradeDownload Tool

Click on load icon

Navigate to the folder containing the firmware

Select the pac file in the firmware folder

Wait for it to load in Research Download/UpgradeDownload tool

Click Play/Start button

Now connect the device to PC while holding volume down key

(Some new devices requires holding volume up key)

Wait for flashing process to complete

When you see Passed! Then note that the flashing or upgrading process is complete

Disconnect and boot up device

For a more detail tutorial with video and pictures click here

You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices

ITEL P11 QUICK REVIEW 

Itel A51 runs on a 1.3 GHz quad-core with ARM Mali 400 MP2 Spreadtrum SC7731C SoC. 1GB RAM and 16GB internal Storage. Preloaded with Android 6.0 Marshmallow. Standard connectivity present are Wifi, bluetooth and gps available. Dual SIM  standby (EDGE / GPRS, HSDPA+). 

You can buy cheap iTel devices from Konga and Jumia online stores

ITEL P11 STOCK ROM

P12-W506A-6.0-OP-V004-20170221

DOWNLOAD ROM

P11-W506A-6.0-OP-V001-20170109

DOWNLOAD ROM

Like and Share

facebook.com/romkingz

Please Leave a comment after using this ROM

Report if you cannot download this file.