DOWNLOAD NCK DONGLE ANDROID MTK 2.5.6.2 WITH LOADER

If you don’t know, nck dongle is also another very useful software for Mobile phone repair especially. It has support for many phones and CPU and they are still updating their list on coming updates.
I'm sharing nck dongle with free loader ie you are going to use it for free but the software shared here has support only for MediaTek (MTK) devices unlike the miracle box and gsm aladin I've shared some time ago.  If you need to use the full module with no problem, buy and activate the original dongle.

You can use nck dongle mtk module to perform many different task 
just like Miracle Box, gsm aladin, etc

Flash/unbrick MTK devices (Write Flash)

Read and reset pattern lock

Read and unlock security codes

Read and remove privacy protection password

Factory Reset Protection (FRP)

Repair IMEI

Reset device without root/adb

Network Unlock
Make Stock Backup (Read Flash)
Advance Formatting options
And many more…..

NCK DONGLE MTK MODULE NO HWID

DOWNLOAD

*****How to run nck dongle with free loader*****
extract the zipped file
run NCK MTK Full No HWID.exe in the extracted folder
Then Click OK button from the GSM X TEAM popup that appears.
Then on the next popup, click NCK Dongle Android MTK 2.5.6.2 button

NOTE
Like I always say the software shared on this page is just like a demo of the real stuff. If you like to experience the full power of this software, buy the real nck dongle you will get all updates and also support the developers

How to install Windows OS on Dual OS Tabs (Android/Windows) with intel chips

Most Tabs nowadays running on intel processor run two OS ie Android and Windows. It’s really nice having two-operating system running on a single device. You can just switch from one to the other. Major problem occurs when one of this OS crash and you have to reload it.

I already did a tutorial on how to flash Android OS on these types on devices if you didn't see it, go here. This tutorial here will show you how to install Windows OS on this device. It is usually done after installing Android OS so I recommend you to read the previous tutorial above except your Android partition is still working perfectly or you just want only Windows.

The normal process to follow: Flash BIOS >> install Android >> install Windows

Note

There is really no need to flash BIOS if the problem with the device is just crash of the operating system.

If you flash a wrong BIOS file, the device will brick.

Do this at your own risk!!!!!

Requirements

USB Flash Drive (minimum of 8GB)

OTG cable

USB Hub with at least 3 ports

USB keyboard (if device does not have one)

Battery power should be at least 40%

You can skip Flashing BIOS and Installing Androidstep if you just want to install Windows OS direct.

Flashing BIOS

Format USB Drive (FAT)

Rename USB drive to WINPE

Extract firmware downloaded

Copy files in BIOS folder to root of formatted USB Drive

Connect USB hub to device

Connect USB Drive and keyboard to hub

Turn on device while pressing ESC key continuously (Some devices use F7, delete)

Navigate to Boot manager

Select USB drive from the list and wait for flash process to begin

When it’s done, device will reboot automatically.

If you flash the BIOS above, you will need to install android before you install windows.

Installing Android

Tutorial on how to install Android OS on this type of device is found here.

Install Windows OS

Format the USB flash drive (NTFS format)

Rename the USB flash drive to WINPE

Extract the firmware and open Windows image folder

Copy all the files inside to the root of the USB Flash drive

Connect the USB hub to device

Attach USB Flash drive, and keyboard to the ports of the USB hub

Now power on device while pressing ESC key continuously on keyboard (some devices use F7 or Delete key)

The device will enter Boot mode

You can now use direction keys on keyboard and navigate to boot manager icon then press Enter key

Use direction key and select the boot device from the list ie UEFI: USB Drive

Press Enter key to start installation.

Now wait till the installation process is complete usually takes about 10 – 30 mins

The device will boot after the process is complete.

Hope this helps

Like and share

facebook.com/romkingz

DOWNLOAD TECNO i3 STOCK ROM/FIRMWARE

Note

Follow the instructions on how to flash the device carefully below

I will not take responsibility on whatever may happen to your device.

Flash at your own risk..

Make sure you are downloading the exact ROM of the device you want to flash because 

 flashing a wrong preloader, will make the device completely dead 

(can't power on, can't charge and will not be detected by a computer)

How to flash MTK devices using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you encounter any error while flashing your device, click here and see if it solves your problem

 TECNO i3 QUICK SPECS

Android 7.0 with HiOS UI (Nougat)

5.0-inch Touchscreen, 720 x 1280 , IPS 294 ppi 

1.5GHz quad-core Processor

MediaTek MT6737

2GB RAM

16GB Internal Memory 

Supports up to 128GB microSD

8MP Rear Camera, LED Flash, Auto Focus

8MP Front Camera 

Dual SIM

2G: GPRS /EDGE

3G: HSDPA
4G LTE

WIFI 802.11 b/g/n

bluetooth 4.2

3050mAh Battery

TECNO i3 STOCK ROM

I3-H375A1-N-IN-161221V28

DOWNLOAD ROM

 Learn how to easily download files from Mega

PC or Mobile

Report if you cannot download any of these files.

Like and share
facebook.com/romkingz

Donate to support this site

DOWNLOAD BONTEL i8 STOCK ROM/FIRMWARE

Bontel i8

Android 4.4.2

MediaTek MT6572

Factory Firmware

Language support : en_US fr_FR ar_EG fa_IR pt_PT es_ES ru_RU vi_VN th_TH in_ID ms_MY tr_TR my_MM uk_UA lo_LA km_KH bn_IN

a20be_ax_tianmao_i8_bontel_home_v003_20150710

DOWNLOAD

Learn how to easily download files from Mega

PC or Mobile

How to flash this device using SP Flash Tool

Download, MTK VCOM USB drivers from here

Download, latest SP Flash Tool from here

Launch Flashtool inside the extracted folder

Click on scatter loader button

Select the scatter file inside the stock ROM folder of the device you want to flash

Select either Download only, Firmware Upgrade or Format + Download from drop down menu

Click Download Button

Now turn off and connect your device to PC

Wait for flashing process to complete

Reboot device

If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash

For a more detail guide with video and pictures on how to use SP Flash Tool, click here

You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device

If you have null/invalid imei after flash, fix it using mtk engineering app, miracle box, maui meta 3g

If you encounter any error while flashing your device, click here and see if it solves your problem