How to Root Nexus 6P to Nougat 7.0 NBD90X Factory Image.| for sock rom go to rompure.com

The latest Android 7.0 Nougat NBD90X update for Huawei Nexus 6P is now rolling out . This new firmware carries the latest October security patch. A lot of security bugs were addressed in this update. Except for the security patch, nothing has changed drastically. Nonetheless, you should definitely update your Nexus 6P to Android 7.0 Nougat NBD90X

Prerequisites:

• This root method is only for Android 7.0 (NBD90X) installed on Nexus 6P and I am not sure if it will work on the other variants of the Nexus 6P on other carriers.
• Your Nexus 6P bootloader should be unlocked.
• Nexus 6P should be on Android 7.0 NBD90X software version.

Important: Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

How to Root Nexus 6P on Nougat 7.0 NBD90X Factory Image

Step 1 – Download Android SDK from the Android Developers website and install. Also set it up with downloading platform-tools and USB drivers package in SDK. See: How to Set up ADB and Fastboot on Windows.

Step 2 – Enable USB Debugging mode in your Nexus 6P.

Step 3 – Download Fastboot from the following links depending on your OS and extract it in android-sdk-windows\platform-tools directory. Create directory if not already there.

• Windows: Download here
• Mac: Download here
• Linux: Download here.

NOTE: Skip Steps 1, 2, 3 if you already have them.

Step 4 – Download SuperSU v2.78 for Nexus 6P on your PC, if you haven’t already.

Step 5 – Connect and mount your Nexus 6P USB memory on your computer using the USB cable.

Step 6 – Now copy/paste the SuperSU-v2.78-201609011115.zip file to your SD card. Make sure the file is in the SD card / internal storage root (not in any folder).

Step 7 – Then turn OFF your phone.

Step 8 – Download twrp-3.0.2-0-angler.img and save it to your android-sdk-windows\platform-tools directory on your computer.

Step 9 – Now go into Fastboot/Bootloader Mode on Nexus 6P. How? Press Volume Down + Power keys for a few seconds till you see some text on the screen. This is Bootloader Mode.

Step 10 – Navigate to android-sdk-windows\platform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).

Step 11 – Type in the following command and press Enter.

fastboot flash recovery twrp-3.0.2-0-angler.img

Step 12 – Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.

Step 13 – In ClockworkMod recovery, scroll down to “flash zip from SD card” and press the power button to select it.

Step 14 – Press the Power button again and select “choose zip from sdcard”.

Step 15 – Now using your volume keys, navigate to SuperSU-v2.78-201609011115.zip and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 16 – After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the Recovery menu. The phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait.